Table of Contents
Advertisement
MicroLite Receiver User Manual
2.3.4 MPEG4 Decoder
The MLR contains a built-in MPEG4 (H.264 part 10) compliant decoder. The decoder
audio and video output is available on the SDI output jack. Both HD-SDI and SD-SDI
are output on the SDI jack.
2.3.5 Video Outputs
Video output jacks include:
2.3.6 Audio Outputs
The MLR has left and right audio line output jacks. Stereo audio is also part of the ASI
and SDI video outputs. The Audio output jacks are 75 Ohm RCA connectors.
2.3.7 User Data Output
A data channel is transmitted with the audio and video information. Access of the data
channel is through the RS-232 serial interface output connector. The baud rate and other
RS-232 parameters are programmable.
2.3.8 Video over IP Encapsulation for Streaming Video
The MLR features a 100 Mbps Ethernet LAN interface for streaming video over IP.
This feature allows received video to be viewed remotely using MPEG4 decoder
software on a personal computer.
2.3.9 Faceplate Status Display and Preset User Interface
If you commonly use several configurations in the field, the faceplate LED preset
settings and "Set" selector button provide a quick way to change pre-programmed
configurations. Status information is also presented by LED's. Refer to Chapter 5 for
more information.
The Preset configurations are pre-programmed using the Remote Control Windows PC
GUI or Web GUI interface. To program a preset, adjust any of the settings within the
MLR, and then save the current group of settings by assigning a Preset number. The
Presets are recalled by using either the faceplate user interface or the Remote Control
PC GUI or the Web GUI interfaces.
2.4 Remote Control and Firmware
2.4.1 Remote Control via Ethernet
An Ethernet port allows remote control of all configuration options, as well as
monitoring of internal status and settings.
The IMT NanoController GUI is available for controlling the unit via the Ethernet port.
Any Windows compatible computer running Windows XP/Vista/7 with 500 MB of
memory and 1 GHz Pentium or above can be used. Refer to Chapter 5, "Operation" for
more information.
Revision 1.1
ASI – MPEG4 encoded transport stream
SDI – HD-SDI and SD-SDI audio and video
Composite Video – The MLR composite video output circuit automatically
outputs either NTSC or PAL, per the user specified settings.
13
Advertisement
Table of Contents
