For Your Safety - Panasonic KX-HNC810 Information And Troubleshooting Manual

• This product may be used in ways that violate
the privacy or publicity rights of others� You are
responsible for the ways in which this product is
used�
F
or your safety
To prevent severe injury and loss of life/property‚ read
this section carefully before using the product to ensure
proper and safe operation of your product�
WARNING
Power connection
• Use only the power source marked on the
product�
• Do not overload power outlets and extension
cords. This can result in the risk of fire or electric
shock�
• Completely insert the AC adaptor/power plug
into the power outlet� Failure to do so may cause
electric shock and/or excessive heat resulting in
a fire.
• Regularly remove any dust‚ etc� from the AC
adaptor/power plug by pulling it from the power
outlet‚ then wiping with a dry cloth� Accumulated
dust may cause an insulation defect from
moisture‚ etc. resulting in a fire.
• Unplug the product from power outlets if it
emits smoke‚ an abnormal smell‚ or makes
an unusual noise� These conditions can cause
fire or electric shock. Confirm that smoke
8
PNQX8829ZA_M1_ITG_(en)_0208_ver100.pdf 8
has stopped emitting and contact us at
http://shop.panasonic.com/support
• Unplug from power outlets and never touch the
inside of the product if its casing has been broken
open� Danger of electric shock exists�
• Never touch the plug with wet hands� Danger of
electric shock exists�
• Do not connect non-specified devices.
Operating safeguards
• Unplug the product from power outlets before
cleaning� Do not use liquid or aerosol cleaners�
• Do not disassemble the product�
• Never put metal objects inside the product. If
metal objects enter the product‚ turn off the
circuit breaker and contact an authorized service
center�
• Keep small parts‚ such as microSD cards‚ out of
the reach of children� There is a risk of swallowing�
Medical
• Consult the manufacturer of any personal
medical devices‚ such as pacemakers or hearing
aids‚ to determine if they are adequately shielded
from external RF (radio frequency) energy�
Wireless LAN features operate between the
frequencies listed below‚ with a peak transmission
power of 100mw:
2�412 GHz – 2�462 GHz
5�180 GHz – 5�320 GHz
5�500 GHz – 5�700 GHz
2019/02/08 19:44:17