Troubleshooting (Initial Setup By Easy Setup) - Panasonic KX-HNC810 Information And Troubleshooting Manual

T
roubleshooting (Initial setup by Easy Setup)
What is WPS?
WPS is a function of wireless routers that is used to easily connect wireless devices to wireless routers�
A WPS button on a wireless router indicates that it has the WPS function� (Depending on the type of wireless
router‚ the WPS function may be disabled on the wireless router even if there is a WPS button�)
If you have trouble during the initial setup‚ check the following causes/solutions fi rst‚ and then turn off the
camera and restart it�
Problem
When initial setup The camera's
is performed LED indicator is
using a WPS blinking in red�
button (Easy
Setup)‚ the
following screen
is displayed and
the setup cannot
be completed�
PNQX8829ZA_M1_ITG_(en)_0208_ver100.pdf 15
Cause Solution
The WPS function on Some Internet Service Provider wireless routers
your wireless router may have WPS disabled�
may be disabled� Try "Manual Setup"�
• Unplug the camera and then plug it in again‚
and then try again from the beginning�
• Try initial setup without using a WPS button on
your wireless router (Manual Setup)�
The camera and • Move the camera and wireless router closer
wireless router are together�
too far away�
• Unplug the camera and then plug it in again‚
and then try again from the beginning�
The wireless router is • Press the WPS button on the wireless router
not in WPS mode� for long enough until the LED indicator on the
router starts blinking�
Several cameras • Only 1 camera can be operated in WPS mode
at a time�
are in WPS mode�
• Unplug the camera and then plug it in again‚
and then try again from the beginning�
15
2019/02/08 19:44:18