Table of Contents
Advertisement
NOTICE
Material damage
Risk of damage to the gear unit.
If any inexplicable changes are noticed during operation of the gear unit, such as an important increase
in temperature or unusual noises, the drive unit must be stopped immediately.
DANGER
Danger to life through rotating and/or movable parts
Risk of being caught or drawn in by rotating and/or movable parts.
Rotating and/or movable parts must be fitted with suitable safeguards to prevent contact.
Note
When the gear unit is incorporated in plant or machinery, the manufacturer of such plant or machinery
must ensure that the prescriptions, notes and descriptions contained in these instructions are
incorporated in his own instructions.
•
Removed safety equipment must be refitted prior to starting up.
•
Notices attached to the gear unit, such as rating plate and direction arrow, must always be observed.
They must be kept free from dirt and paint at all times. Missing plates must be replaced.
•
Screws which have been damaged during assembly or disassembly work must be replaced with new
ones of the same strength class and type.
•
Spare parts must be obtained from Siemens (see section 11, "Spare parts, customer service").
3.2
Special dangers and personal protective equipment
Depending on operating conditions, the surface of the gear unit may heat up or cool down to extreme
temperatures.
WARNING
Risk of burns
Risk of serious injury through burns on hot surfaces (> 55 °C).
Wear suitable protective gloves and protective clothing.
WARNING
Danger through low temperatures
Risk of serious injury through frost (pain, numbness, frostbite) on cold surfaces (< 0 °C).
Wear suitable protective gloves and protective clothing.
WARNING
Risk of scalding
Risk of serious injury through escaping hot operating media, when they are being changed.
Wear suitable protective gloves, protective glasses and protective clothing.
BA 5080 en 06/2014
12 / 72
Advertisement
Table of Contents
