Pairing And Connecting With Other Bluetooth Devices - Sony WI-C200 Help Manual

Help Guide
Wireless Stereo Headset
WI-C200 / WI-C310

Pairing and connecting with other Bluetooth devices

The operation to register the device that you wish to connect to is called "pairing". First, pair a device to use it with the
headset for the first time.
Before you start the pairing operation, make sure that:
The Bluetooth device is placed within 1 m (3 feet) of the headset.
The headset is charged sufficiently.
The operating instructions of the Bluetooth device is in hand.
Enter pairing mode on this headset.
1
Turn on the headset when you pair the headset with a device for the first time after you bought it or after you
initialized the headset (the headset has no pairing information). The headset enters pairing mode automatically.
When you pair a second or subsequent device (the headset has pairing information for other devices), press and
hold the button for about 7 seconds.
Check that the indicator (blue) repeatedly flashes twice in a row. You will hear a voice guidance "Bluetooth pairing".
Perform the pairing procedure on the Bluetooth device to search for this headset.
2
[WI-C200] or [WI-C310] will be displayed on the list of detected devices on the screen of the Bluetooth device.
If it is not displayed, repeat from step 1.
Select [WI-C200] or [WI-C310] displayed on the screen of the Bluetooth device for pairing.
3
If Passkey (*) input is required, input "0000".
*
A Passkey may be called "Passcode", "PIN code", or "Password".
Make the Bluetooth connection from the Bluetooth device.
4
Some devices automatically connect with the headset when the pairing is complete. You will hear a voice guidance
"Bluetooth connected".
56