Sony WI-C200 Help Manual page 72

To end the call, press the
4
If you received a call during music playback, music playback resumes automatically after ending the call.
Hint
Some smartphones or mobile phones receive calls with the phone instead of the headset by default. With an HFP or HSP
connection, switch the call to the headset by pressing and holding the
smartphone or mobile phone.
Volume for a call can be adjusted during a telephone conversation only.
The headset volume during a call and during music playback can be independently adjusted. Changing the call volume does not
change the volume of music playback and vice versa.
Note
Depending on the smartphone or mobile phone, when an incoming call arrives while you are listening to music, playback may not
resume automatically even if you finish the call.
Use a smartphone or mobile phone at least 50 cm (19.69 in.) away from the headset. Noise may result if the smartphone or
mobile phone are too close to the headset.
Your voice is heard from the headset through the headset's microphone (Sidetone function). In this case, ambient sounds or the
sounds of the headset operation may be heard through the headset, but this is not a malfunction.
Related Topic
How to make a wireless connection to Bluetooth devices
Making a call
Functions for a phone call
(call) button on the headset again.
5-004-549-11(1) Copyright 2019 Sony Corporation
72
(call) button for about 2 seconds or by using your