How To Measure Blood Pressure - Bioland 2006-2B User Manual

How to measure blood pressure

1. Set up the cuff to your upper arm as previous section of "How to use the upper
arm cuff".
2. Press the power button, The LCD display and the voice guiding the correct
posture and measurement while the arm cuff start to inflate.
3. During the voice guiding the cuff is fully inflated, it will automatically start to
deflate and the heart symbol will appear to indicate that measurement is in
progress, once the symbol stop flashing and detect systolic, diastolic and pulse
then the voice will announce the measure result.
When the monitor detects an irregular rhythm that varies by less
than 25% from the average rhythm two or more times during the
measurement, the Irregular Heartbeat Symbol will appear on the
display with the measurement values, we recommend you consult
your physician.
Remain still and do not talk during the measurement. Position your arm higher than
the heart will get lower measure result, contrarily the measure result will get higher.
This unit can intelligently adjust the cuff pressure and inflate to a higher pressure
level when needed, so its normal when the unit re-inflate during one measurement.
Note:
The value measured will be too low if you hold your cuff higher than heart

level, or will be too high if you hold your cuff lower than heart level.
The unit may store 10 measurements, if the data more than 10 records, it will

delete the earliest data.
During measurement do not speak or shake as which may affect the accuracy of

the result.
If you want to stop the measurement during measurement process, just press

the power button to stop immediately.
Page 8 of 14