Turning Off The Main Power - Ricoh PG-C2 Operating Instructions Manual

Turning Off the Main Power

Turn off the main power as follows:
Important
❒ If the operation switch indicator is lit or flashing, do not turn off the main power
switch. Doing so might damage the hard disk or memory, leading to malfunctions.
❒ When the machine finishes printing, it covers its print-heads. Before turning
the machine off, allow the machine 10 seconds to cover its print-heads after
finishing printing.
❒ Make sure to turn off the main power switch before pulling out the power plug. Not
doing so may result in damage to the hard disk or memory, leading to malfunctions.
A
Make sure the operation switch indicator is not lit.
B
Turn off the main power switch at the back of the machine.
The main power indicator goes off.
Note
❒ When the main power switch is turned off while using the fax function,
waiting fax and print jobs may be canceled, and incoming fax documents
may not be received. If you have to turn off this switch for some reason,
make sure 100% is shown as available memory on the screen before turn-
ing off the main power switch or unplugging the power cord. Fax files in
memory are deleted twelve hours after you turn off the main power switch
or unplug the power cord. For details, see "Turning Off the Main Power /
In the Event of Power Failure", Troubleshooting.
❒ The operation switch indicator does not go off, but flashes in direct dialing
mode even if you press the operation switch. When this happens, check the
items below, and turn off the main power switch.
• the computer is not controlling the machine.
• the machine is not receiving a fax.
Turning On/Off the Power
1
29