Grease Filters - Miele DA 5000 D Operating And Installation Instructions

Cleaning and care

Grease filters

The re-usable metal grease filters in the
appliance remove solid particles
(grease, dust, etc.) from the kitchen
vapours, preventing soiling of the
cooker hood.
The grease filters should be cleaned
regularly (at least every 3-4 weeks) to
avoid a build-up of fat, but always clean
immediately if the l sensor lights up.
An oversaturated filter is a fire
hazard.
To remove the grease filters, the
canopy needs to be open.
^ Touch the s sensor to switch the fan
on.
The fan will start running at power level
2, and the canopy will open.
^ Touch the "2" sensor for approx. 5
seconds, until the fan switches off.
The canopy will remain open.
18
To avoid damaging the filters or the
hob below, make sure you hold the
filters securely at all times when
handling them.
^ Holding the grease filter by the
handle, push upwards out of the
lower groove, hinge it forwards and
lift it down and out.
Cleaning the grease filters by hand
^ Clean the filters with a soft nylon
brush in a mild solution of hot water
and a little washing-up liquid.
Do not use "neat" washing up liquid.
Do not use:
– cleaning agents containing
descaling agents,
– alkaline cleaning agents (with a pH
value higher than 7), such as powder
cleaners, cream cleaners or abrasive
all-purpose cleaning agents,
– oven sprays.