Installing A Hard Drive - HP EliteDesk 705 G4 Desktop Mini Hardware Reference Manual

Installing a hard drive

NOTE: See Removing a hard drive on page 16
1. If you are replacing a hard drive, transfer the four mounting screws from the old hard drive to the new
hard drive.
NOTE:
2. If you are installing a hard drive rather than replacing a hard drive, you must install the hard drive cage.
Place the hard drive cage down into the chassis, and then slide it forward (1). Install the two screws (2)
that secure the hard drive cage to the chassis, and then connect the hard drive cable (3) to the system
board. Secure the cable by attaching the hard drive cable clamp (4) to the system board connector.
Mounting screws can be purchased from HP.
for instructions on removing a hard drive.
Installing a hard drive 17