Table of Contents
Advertisement
C.3. Mounting Brackets (Optional)
In addition to the Mounting Buttons and Mounting Plates that are included with the NBB
unit, optional mounting brackets are also available. The Mounting Brackets allow the
NBB to be installed on the mounting rails found in most standard equipment racks.
1.
Attaching the Mounting Brackets to the NBB: The Mounting Brackets can be
attached to the NBB unit using the three pairs of screw holes on either side of
the NBB unit. Use screws supplied with the Mounting Bracket kit to secure three
Mounting Brackets on one side of the NBB unit as shown in Figure C.5 below.
2.
Attaching the Mounting Brackets to the Equipment Rack: Align the Mounting
Brackets with the screw holes in the equipment rack's mounting rail and then use a
retaining screw to secure each Mounting Bracket to the equipment rail.
Rear Panel
Figure C.5: Installing Optional Mounting Brackets
Mounting Brackets
(Optional)
Front Panel
Apx-6
Appendices
Advertisement
Table of Contents
