KTM 450 EXC-F 2020 Owner's Manual page 108

13 BRAKE SYSTEM
106
Info
Make sure that you do not press the brake caliper
against the spokes when pushing back the brake
pistons.
–
Remove cotter pin
brake linings.
–
Clean the brake caliper and the brake caliper bracket.
E00344-10
–
Check that spring plate
7
plate
100397-01
–
Insert the new brake linings, insert the pin, and mount the
cotter pins.
Info
Always change the brake linings in pairs.
–
Operate the hand brake lever repeatedly until the brake
linings are in contact with the brake disc and there is a
pressure point.
E00345-10
4 5
, pull out pin
6
in the brake caliper and sliding
in the brake caliper bracket are seated properly.
, and remove the