Operation via the control unit
2
Operation via the control unit
If the appliance is connected to a BM-2 the setting functions are deactivated. The BM-2 takes over these
Please
functions.
note
Display menu
- Display code
- Select code
- Display code value
06 | WOLF GmbH
Reset
Reset
-
(Press 1 x briefly)
- Bring up contractor level
(press and hold for 10 s), only
for contractors.
Emissions test mode
(To enable, press and hold buttons
simultaneously for 5 s)
- The boiler runs under full load for 15 mins.
- Press "Reset" to disable.
Operating mode button
Standby (OFF)
The boiler is switched off,
only frost protection is
enabled.
Summer mode
Only DHW heating enabled
Winter mode
Heating and
DHW heating enabled
3064461_201903