General Information; Batteries: What Do I Need To Know About Batteries; Hardware: Sensor And Station; What Are The Power Requirements For This Station - Lacrosse C84343 Faqs

Hide thumbs

Table of Contents

BATTERIES: WHAT DO I NEED TO KNOW ABOUT BATTERIES?

•

Good fresh batteries are important for best performance in your sensor and as backup in

your station.

•

Batteries with an expiration date of 2020, were manufactured in 2010.

•

We recommend batteries with an expiration date no more than 6 years in advance of the

current year for best performance.

•

A minimum voltage of 1.48 v per battery is required for best performance.

•

Lithium batteries may be used in outdoor sensor. Alkaline batteries for the station.

Your C84343 station comes with:

LTV-TH2 Thermo-hygro sensor that reads Temperature and Humidity.

Your sensor operates at 915MHz RF.

WHAT ARE THE POWER REQUIREMENTS FOR THIS STATION?

LTV-TH2: 2-AA batteries

C84343: 5 volt power cord (required) and 3-AA batteries for optional backup of your time and

date. Battery operation only will not update sensor or Wi-Fi data. Power cord is required.

POWER CORD INPUT: WILL THIS STATION WORK IN OTHER COUNTRIES?

•

Your power cord input is 100-240V 0.3A 50/60Hz, and may work in other countries if the

proper plug adapter is used (not included).

Note: There is no guarantee this station will worn in another country.

•

As a standalone station-, you can use this anywhere.

Note: As a standalone station (sensor to station), you can use this station in other countries.

However the La Crosse View™ app was designed to work with the National Weather Service

(NWS) and National Institutes of Standards and Time (NIST) in the USA. Because of this, we

cannot guarantee that any "connected" features will work in another country.

Your station is a fully functional standalone station.

1. Install batteries into your sensor (any order).

2. Install power cord into wall outlet, and into the station. Install batteries into the station if you

wish.

3. Let sensor and station sit within 10 feet of each other for several minutes to lock the sensor

signals to the display.