Repose Multi C-Air User Manual page 19

Warning - DO NOT attempt to do this alteration if you feel that the movements that you need
to achieve with the chair, to carry out the changes, will cause you discomfort or problems.
Seat Chaise and cover
The Multi C-air benefits from a single, full seat cover
and chaise. This chaise removes any pinch points and
reduces the risk of pressure areas developing because
of them. It also provides deep comfort to all parts of
the body in contact with the chair. The chaise cover
and memory foam are removable.
To remove firstly take off the back cushion. Then at
the back of the seat cushion release the chaise from
the Velcro and peel off the chaise. The chaise is also
secured by Velcro to the front of the seat and under
the footplate, again simply peel off.
Seat Depth adjustment
The seat Depth is very important as it should be long
enough to support the upper part of the legs whilst
allowing the user's back to rest comfortably on the
backrest. The Multi C-air has the option of a choice
of two sets of detachable adjuster pads, 25mm (1") or
50mm (2"). They simply fit behind the back cushions
using the Velcro strips, as the image demonstrates.
Seat Height adjustment
Adjust the seat height, for the taller person, by adding
50mm (2") leg adjusters and extending the leg rest
by releasing two pins under the chair. Firstly tip the
chair forward so it rest on the back and the arms
so that you can access the base of the chair. Then
remove the existing heavy duty glides (by unscrewing)
and then fit the leg adjusters in their place. When
tipping the chair over ensure that you take care to
protect the back and arms when they touch the floor.
19