Sony ZS-D50 Operating Instructions (primary manual) Operating Instructions Manual page 37

Tip
To record a track from
a number of different
CDs, EDIT 1TRACK is
useful (page 26).
1 Make connections.
2 Turn on this player
and the connected
component.
3 Do steps 2 through 4
on pages 26 and 27.
4 Make the connected
component ready for
recording.
5 Start playing a CD on
this player.
Tip
You can record the
sound of the connected
component. Insert a
blank tape into the tape
compartment, and
press r/P then
TAPE( (page 11).
1
Remove the jack cover from the OPTICAL
DIGITAL OUT (CD) jack of this player and connect
the jack with the digital input jack of the MiniDisc
recorder or other component using the digital
connecting cable (not supplied) .
2
Turn on the power of this player and the connected
component.
3
Make the connected component ready for
recording.
4
Start playing a CD on this player.
Listening to TV, VCR and MiniDisc player/
recorder
TV, VCR, MiniDisc
player/recorder,
etc.
to line
output jack
1
Connect the LINE IN jack of this player with the
line output jack of the MiniDisc player or other
component using the audio connecting cable (not
supplied) .
2
Turn on the power of this player and the connected
component.
3
Press MD (LINE) and start playing sound on the
connected component.
The sound from the connected component is
output from the speakers.
Rear panel of this
player
to LINE IN jack
Audio connecting
cable
For MiniDisc recorder:
RK-G136HG (1.5 m)
(not supplied)
For MiniDisc recorder:
RK-G129HG (1.5 m)
(not supplied)
continued
37
Setting Up