Sony ZS-D50 Operating Instructions (primary manual) Operating Instructions Manual page 26

Recording the tracks on CD by specifying the tape length
(continued)
Tips
• You can edit a CD
having 20 tracks or
fewer.
• We recommend that
you use AC power as
the power source for
optimum recording
quality.
Note
Do not open the CD
tray while editing; the
settings for recording
will be erased. If you
do, start from step 1
again.
26
The Tape Player
r/P
Recording a single track (EDIT 1TRACK)
EDIT 1TRACK is useful to record the first track of
single CD, and to record a track from a number of
different CDs. Recorded on the both sides mode
" " is automatically selected.
1
Insert a blank tape into the tape compartment.
2
Press p on the CD section until "Cd" appears in
the display.
3
Press EDIT to display "E-1".
6 PUSH
p OPEN/CLOSE
(
EDIT
ENTER
MEMORY
CHECK
p
=, +
.