Establishing Communication with Computer
The LC Injector HTC/HTS System allows a serial communication protocol with
a PC or LAN communication, also referred to as TCP/IP or Ethernet.
The LC Injector HTC requires a dedicated APR Control-xt board and PAL
Firmware level 4.1.X or higher.
COM Port Settings
The port settings are normally defined in:
Windows\Control Panel\Device Manager\Ports.
The standard settings for the serial communication are shown in
page 120. It is important to understand that the application (e.g. PAL Loader
Software) does actively set the communication parameters, and the baud rate
is set for optimized use.
Agilent 1290 Infinity LC Injectors HTC/HTS User Manual
LC Injector HTC/HTS Description and Installation
Establishing Communication with Computer
3
Figure 62
on
119