Figure 38: Removing And Installing The Jcs 1200 Bezel Collar - Juniper JCS 1200 Hardware Manual

Juniper Control System (JCS) 1200 Platform Hardware Guide
Removing a JCS 1200 Bezel Collar
Figure 38 on page 100 shows how to remove and install a bezel collar.

Figure 38: Removing and Installing the JCS 1200 Bezel Collar

To install a JCS 1200 bezel collar (see Figure 38 on page 100):
1.
2.
3.
100
Removing a JCS 1200 Bezel Collar
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist and
connect the strap to one of the ESD points on the chassis.
Remove the bezel. See "Removing a JCS 1200 Bezel Filter" on page 107 for more
information.
Remove the light path extension assembly (see Figure 39 on page 101). Two light
path extension assemblies are shipped with the JCS 1200 Bezel to extend the
light path LEDs so that they are visible through the bezel. Remove one light path
extension assembly for each of the media trays installed in your JCS 1200
platform.