Pipeline DUAL Instruction Manual page 6

03 CLEAROMIZER FILLING
Fill the clearomizer with eliquid taking care not
to exceed the upper edge of the centre tube, then
retighten the base.
Do not put liquid
in the centre tube.
Wait a short time after the initial fi lling so that the wicks
can absorb with liquid.
04 ASSEMBLY
Screw the Clearomizer onto the battery.
05 USING YOUR PIPELINE
It is IMPORTANT to use the correct technique.
To inhale, do not take a quick 'puff', but rather take
a medium to long slow drag /draw in regularly. You
will recognise the correct technique by the abundant
amount of vapour produced.
The PIPELINE DUAL will only work while the button is
pressed. Press the button and inhale simultaneously.
Release the button after inhalation. Whilst the button is
pressed the LED will light up.
The Clearomizer units have wearing parts (coil head
without warranty) and can easily be replaced.
06 REPLACEMENT OF CLEAROMIZER COIL HEAD
Unscrew the clearomizer from the battery,
open the clearomizer, unscrew the coil
head from the base and replace with a
new one.