LG LB645479T Owner's Manual page 99

HOW TO USE SPRAYER
Before use
1. Release pump assembly to
counter-clockwise.
2. Fill water to 150ml level.
Do not exceed 240ml level.
3. Replace pump assembly and
tighten to clockwise.
CAUTION :
• Read instruction before use.
Ensure all fitting are tight.
• Do not use solvents in this
sprayer.
Use only water based liquids.
• Do not over pressurize.
• Do not store pressurized.
How to use
1. Move the handle up and
down paying attention to the
resistance that builds as the
tank pressurize. When pumping
becomes difficult, stop. The
tank is pressurized.
2. Use thumb trigger to deliver
precise doses of spray.
Thumb trigger may be locked-
on with locking key.
3. Use the pump handle to
pump more pressure into the
tank as the spray weakens in
strength.
4. As you spin the cock of
nozzle, you can control the
concentration level of water.
99