Advertisement
7-21
INDOOR UNIT (setting by controller)
Function setting for indoor unit can be done by using the remote controller.
As for the "FUNCTION SETTING", refer to the DESIGN & TECHNICAL MANUAL for each
product.
1) When [Menu button] is pressed twice while "Monitor"
screen is displayed, it switches to the "Submenu" screen.
If [Menu button] is pressed while the "Submenu" screen is
displayed, the display returns to the "Monitor" screen.
2) Press the [Screen switch button (Left)] and [Screen switch
button (Right)] simultaneously for 5 seconds to switch to
"Service" screen.
3) Select [Function setting] with pressing the [Cursor button
(Up/Down)], and press the [Enter button].
4) Select [R.C. address] of the target indoor unit with
pressing the [Cursor button (Up/Down)].
(R.C. Address : Remote Controller Address)
5) Select the [Function No.] with pressing the [Cursor button
(Left/Right)], and select the Function No. to be set with
pressing the [Cursor button (Up/Down)].
6) Select the [Setting No.] with pressing the [Cursor button
(Left/Right)], and select the Setting No. to be set with
pressing the [Cursor button (Up/Down)],and press the
[Enter button].
- (OP005 - 13) -
Submenu
1/2
Mo 10:00
[
]
Date and time
Screen
Filter sign
R.C. sensor control
Off
Room temp. display
Off
Back:
Setting:
Monitor
Service
Mo 10:00
Test run
Function setting
Error history
I.U.address verification
Version
Back
Setting:
Service
Mo 10:00
Test run
Function setting
Error history
I.U.address verification
Version
Back:
Setting:
Function setting
Mo 10:00
R.C.
Function
Setting
address
No.
No.
00
00
00
Cancel:
OK:
Version
Error history
Function setting
Mo 10:00
R.C.
Function
Setting
address
No.
No.
00
00
00
Cancel:
OK:
Version
Error history
Function setting
Mo 10:00
R.C.
Function
Setting
address
No.
No.
00
00
00
Cancel:
OK:
Version
Error history
Advertisement
