Pilous ARG 260 S.A.F. Instruction Manual page 51

in accordance with Directive 2006/42/EC of the European Parliament and of the Council (Government Regulation No. 176/2008 Coll.)
in accordance with Directive 2014/35/EU of the European Parliament and of the Council (Government Regulation No. 118/2016 Coll.)
in accordance with Directive 2014/30/EU of the European Parliament and of the Council (Government Regulation No. 117/2016 Coll.)
Manufacturer: Pilous-pásové pily, spol. s r.o., Železná 9, Brno 619 00, CZ, VAT: CZ60727551
Identification data of the machine: Band saw including accessories
Type: ARG 260 S.A.F., ARG 260 plus S.A.F., ARG 300 S.A.F., ARG 300 plus S.A.F.
Description and designation of product function: The band saw is intended for cutting primarily metal materials,
while the workpiece is clamped in a fixed vice and the cutting is carried out by a saw blade arm.
All applicable provisions the machine is in compliance with:
• Directive 2006/42/EC of the European Parliament and of the Council
• Directive 2014/35/EU of the European Parliament and of the Council
• Directive 2014/30/EU of the European Parliament and of the Council
Applied harmonized standards, national standards and technical specifications:
• EN ISO 12100:2011
• EN ISO 14120+rev.1:2017
• EN ISO 4413:2011
• EN 50370 - 1:2005
• EN 50370 - 2:2003
• EN 61000-6-1 ed.2:2007
• EN 61000-6-3 ed. 2 +A1+rev.1:2013
• EN ISO 11202:2011
• EN ISO 3746:2011
• EN 614-1+A1:2009
• EN 16093:2017
• EN ISO 14119+rev.1:2015
• EN 60204-1 ed.2+A1+rev.1:2011
• EN 349+A1:2009
• EN ISO 13857+rev.1:2010
• EN ISO 14118:2018
• EN ISO 13849-1:2017
• EN ISO 13849-2:2013
Person responsible for drawing up technical documentation: Ing. Petr Mašek
name, company address: Pilous-pásové pily, spol. s r.o., Železná 9, Brno 619 00, CZ, VAT: CZ60727551
Person responsible for drawing up EC Declaration of Conformity: Ing. Petr Mašek
name, company address: Pilous-pásové pily, spol. s r.o., Železná 9, Brno 619 00, CZ, VAT: CZ60727551
The manufacturer declares that the machine complies with all relevant provisions of this regulation (Directive)
declares that the machine is in compliance with other regulations (Directives) which apply to the product.
This declaration of conformity is issued under the sole responsibility of the manufacturer.
This EC Declaration of Conformity is original EC Declaration of Conformity.
The last two digits of the year in which the CE mark was placed on the product: 18
Serial number:
In Brno, on: 1.9. 2018
EC Declaration of Conformity
person authorized to act on our behalf
Ing. Petr Mašek
Managing Director