Parameter List; Other - Iloxair ILOX 129 Installation, Operation And Maintenance Manual

24

PARAMETER LIST

Note that incorrect parameter settings can cause moisture problems, operational disruption and other types of malfunction.
TEMPERATURES
Parameter
Supply air temperature
Outdoor air temperature
Extract air temperature
Setpoint
Summer / Winter mode
Output signal, Heater
Output signal Preheater
Output signal Rotor
Output signal Cooling
Control mode / Current setpoint
FANS
Parameter
Supply air fan speed
Extract air fan speed
AIR QUALITY
Parameter
Air quality
SYSTEM OVERVIEW
Parameter
Software version control panel
Bootloader version control panel
Software version control card
Bootloader version control card
Unit type
IP Octet 1
IP Octet 2
IP Octet 3
IP Octet 4
TIME SCHEDULES
Parameter
Time schedules
1) R/W = Read and write value, R = Read only value
FläktGroup DC_10201GB_20190207_R2
For this reason, the settings must be configured by suitably qualified professionals.
Type of value 1) Range
R -40-100
R -40-100
R -40-100
R/W 15-35
R Summer /
Winter
R 0-100
R 0-100
R 0-100
R 0-100
R 15-35
Type of value 1) Range
R 0 or 30–100
R 0 or 30–100
Type of value 1) Range
R 0-100
Type of value 1) Range
R –
R –
R –
R –
R –
R 0-255
R 0-255
R 0-255
R 0-255
Type of value 1) Range
R –
Heat Recovery Unit ILOX 129 - Installation, Operation and Maintenance
Unit Standard value Comment
°C –
°C –
°C –
°C 18 Desired supply air temperature
– –
% – Option
% – Option
% –
% – Not applicable to domestic ventilation
°C –
Unit Standard value Comment
% –
% –
Unit Standard value Comment
% RH – Not applicable to the ILOX unit
Unit Standard value Comment
– –
– –
– –
– –
– ILOX
– – Current IP address, accessory
– –
– –
– –
Unit Standard value Comment
– – Activated time channels, read-only
We reserve the right to make changes without prior notice