20
AIR FLOW ADJUSTMENT, LOGGING IN, SETTINGS
INTRODUCTION
Adjustment of air flow and temperature may only be carried out by an
installation engineer or service personnel.
AIRFLOW ADJUSTMENT
The speed of the fans is adjusted independently of each other.
Normally only HOME mode need be adjusted to meet the design air
flows.
WRONGLY ADJUSTED AIR FLOWS MAY
RESULT IN INCREASED ENERGY CONSUMPTION
AND DAMAGE TO THE BUILDING.
LOGIN
Installation engineers and service personnel must log in to access
"Settings".
The default (preset) password is
FläktGroup
DC_10201GB_20190207_R2
0000
. This password can be changed.
Heat Recovery Unit ILOX 129 - Installation, Operation and Maintenance
SETTINGS FOR INSTALLER AND SERVICE PERSONNEL
For other settings, see parameter list on page 25.
We reserve the right to make changes without prior notice