Heat Recovery Unit ILOX 129 - Installation, Operation and Maintenance
CONTROL PANEL OPERATION, COMMISSIONING
ADJUSTMENT
There are two ways to enter the adjustment menu.
1. The first is to press the question mark on the start screen. The
question mark will not be shown if the menu has been opened pre-
viously.
2. The second is to go to Menu/Settings/Login and select
"2 Adjustment".
Press "2.1 Start" for a step-by-step guide through the settings requi-
red for adjustment. To change a single value, go directly to a specific
menu.
FläktGroup
DC_10201GB_20190207_R2
21
We reserve the right to make changes without prior notice