Generac Power Systems G007144 Owner's Manual page 2

Use this page to record important information about your generator set.
Model:
Serial:
Production Date:
Volts:
LPG Amps:
NG Amps:
Hz:
Phase:
Controller P/N:
ii
Record the information found on your unit data label on this
page. See General Information
data label. The unit has a label plate affixed to the inside
partition, to the left of the control panel console as shown in
Figure 2-1. See Operation
top lid and remove the front panel.
When contacting an Independent Authorized Service Dealer
(IASD) about parts and service, always supply the complete
model and serial numbers of the unit.
Operation and Maintenance: Proper maintenance and care
of the generator set ensures a minimum number of problems
and keeps operating expenses at a minimum. It is the
operator's responsibility to perform all safety checks, to
make sure all maintenance for safe operation is performed
promptly, and to have the equipment checked periodically by
an IASD. Normal maintenance, service, and replacement of
parts are the responsibility of the owner/operator and are not
considered defects in materials or workmanship within the
terms of the warranty. Individual operating habits and usage
may contribute to the need for additional maintenance or
service.
When the generator set requires maintenance or service,
Generac recommends contacting an IASD for assistance.
Authorized service technicians are factory–trained and are
capable of handling maintenance and service needs. To
locate the nearest IASD, visit the dealer locator at:
www.generac.com/Service/DealerLocator/.
Owner's Manual for 50 Hz Air-Cooled Generator Sets
for the location of the unit
for directions on how to open the