Operating Instructions - AirSep LifeStyle Patient Manual

Operating Instructions

1. Locate and position LifeStyle so that the air inlets and air outlet are not obstructed. The unit, particularly
the intake area, should be located in a well-ventilated space to avoid airborne pollutants or fumes.
2. Make sure that a battery pack is in place in the unit. Then power the unit through (a) the battery; (b) a
DC outlet; or (c) an AC outlet. (Refer to the "Power Supplies" section of this Patient Manual.)
a. Use the battery only; or
b. If you are in an automobile, connect one end of the DC auto adapter into the DC outlet and the other
end into LifeStyle's 12-volt DC connector; or
c. If you are near an AC outlet, connect one end of the AC adapter into the LifeStyle's 12-volt DC
connector and the other end into the AC outlet.
3. Connect your cannula to the oxygen outlet.
4. Turn the flow selector from OFF to the setting prescribed by your physician. When you turn on the
LifeStyle unit, a brief alarm sounds. This indicates that LifeStyle is powered for use.
When LifeStyle senses inhalation, oxygen is supplied to you through your cannula. The duration of this
pulse flow is dependent upon the flow setting.
The time required to reach maximum oxygen purity after turning on the LifeStyle unit is three minutes.
LIFESTYLE PORTABLE OXYGEN CONCENTRATOR
13