C O N N Ec T A Turntable - La Boite Concept LX User Manual

7 . C O N N EC T A TURNTABLE

IF YOU OWN A PREAMPLIFIED TURNTABLE (MODERN):
1 / Remove the five silicone pads which are located underneath the blotter: those are stick with
a double-sided adhesive.
2 / Clip the 5 shock absorbers in the groove of the pods provided for the purpose: there are 2
pods per shock absorber.
3 / Then place them in the grooves located on the loudspeaker.
4 / Put the blotter down on the shock absorbers and search for a "click" sound.
5 / Check if the blotter is in the right position on the shock absorbers.
32
6 / Swap to RCA source by switching the button on the input panel.
7 / Plug the turntable's audio signal cable into the AUX input of the LX. Then plug in your turn-
table to the power socket inside the trapdoor.
Do not forget to pass the cables through the hole designed for the purpose.
8 / Press the AUX button on the control panel to select the source.
33