T Urn I N G T H E Power On/O F F; C Hoosin G Yo Ur S Ou Rc E - La Boite Concept LX User Manual

2. T URN I N G T H E POWER ON/O F F

1. Insert the power cord into the power cable plug located under your LX
drawing on page 17).
2 . Place the power cord into the groove on the stands provided for this purpose.
3 . Connect the power cord to the wall socket.
4 . First, turn on the the LX by switching the master ON/OFF at the back of the loudspeaker
(please refer to the drawing on page 17).
5. Then, turn the volume control knob clockwise to switch on the LX. The Bluetooth LED lights up.
26
(please refer to the
6. The LX will automatically go into standymode if youe leave your device without signal for 30
minutes. The standby LED light will turn red. To wake up the device, press the control knob or
play music from either sources.
7. To temporarily put the LX into "off" mode and avoid power consumption, turn the volume
control knob counter clockwise to the "OFF" point until you hear a "click" sound.
8. To fully swith the LX off, switch the master ON/OFF at the back of the loudspeaker
refer to the drawing on page 17). All the LED lights are now off and the USB power discon-
nects. .

3 . C HOOSIN G YO UR S OU RC E

Once you have set up your connections on the input panel, you can select the source you want
to use by pressing the corresponding button on the control panel (from 1 to 7).
/ Selecting the source corresponds to (1) the Bluetooth connection with your devices.
/ Selecting the source corresponds to (2) the Bluetooth pairing with your devices.
/ Selecting the source corresponds to (3) the AUX input.
/ Selecting the source
to connect your vinyl turntable. This source is linked to the RCA/Phono button located on the
input panel.
RCA mode: for a line level input (CD, DVD, ...) or to use if
your turntable is preamplified.
RCA mode: to use with the cable with the two audio ends
(one RCA end and one stereo 3,5mm end) provided.
Phono mode: if your turntable is not preamplified (tradition-
al turntable with a ground output).
corresponds to (4) the Phono or RCA inputs provided
(please
27