Table of Contents
Advertisement
On Mac
3 . C H ARGI NG THROUGH THE IEC POW ER SOC K ET
The LX is equipped with an integrated IEC power socket located in the trap door, on the right
hand. Thanks to the C14 IEC universal adaptor provided, you will be able to plug in and charge
all your devices even when the LX is asleep. However, if you turn off the LX using the master ON
/ OFF, there will no longer be power running through the IEC plug.
4 . US B C HA RGER
The LX comes with a built-in-2-port USB charger. The ports will power your USB devices even if
the speaker is in standby mode. Powering off the LX with the rear main switch will also power off
the USB ports.
The charger works with most USB compliant devices at 5V and can provide up to 2.4A for USB-A-charging
current (for fast iPad charging).
Note : Never use the charger with damaged cables as they could overheat and cause a fire.
USB-A charging current s limited to 15W. This is enough to charge most phones and tablets. The
charger is not compatible with the old iPod Classic (pre 2010)and other rare devices not fully
compatible with the USB standard.
5 . WIR E L E SS CH ARGER
The LX also has a built-in recess inside the top wooden enclosure which can accommodate the
NATIVE UNION wireless charher "DROP" (sold separetly). The DROP can be placed conveniently
inside the foam fixation for easy alignment. Wireless charging connectivity has been tested to
work with iPhone X and iPhone 8/8 Plus. When using other phone models or thick phone cases
the wireless charging may not work. In this case it is recommended to place the wireless charger
on top of the speaker instead of under the wooden enclosure.
You can still use another wireless charger. To proceed so, just remove the foam provided for the
DROP and place your own wireless charger.
30
On Windows
Wireless charger to slide under the elasctic
6 . C AB LE C ON N E CTI O N
OPTICAL: OPTICAL AUDIO DIGITAL INPUT
Use the optical input to connect your LX to your TV, hard disk player, streaming player and satel-
lite or cable receiver. The optical input only works with PCM stereo, if a connected device sends
5.1 audio (or similar surround sound), the LX will not work. We recommend that you use the opti-
cal input for the videos as this cable avoid the latency between image and sound.
To use this connection, you just have to :
1. Connect the optical audio cable to the optical audio input on your source.
2. Turn the LX on.
3. Select Optical source by pushing the control knob.
RCA ANALOG INPUT
Use the RCA input for connecting your LX to audio sources such as your mobile phone, music
player or tablet.
To use this connection, you need to :
1. Connect the audio cable provided to your LX and to the audio output of your music device
(source).
2. Swap to RCA source by switching the button on the input panel.
3. Select RCA/Phono as source by pushing the Control knob unitl RCA/ Phono LED is illuminated.
AUXILIARY : 3.5 MM STEREO PLUG
Use the 3.5mm jack input to connect your LX to audio sources such as your CD player or turntable
(pre-amplified).
To use this connection, you need to :
1. Connect the audio cable to your LX and the audio output of your music device (source).
2. Select AUX as source by pushing the Control knob until the AUX LED is illuminated.
Under the blotter
31
Advertisement
Table of Contents
