PACKAGE CONTENTS / SYSTEM REQUIREMENTS PACKAGE CONTENTS Gaming Controller (Model: RZ06-0261) USB to Micro-USB cable Important Product Information Guide SYSTEM REQUIREMENTS PRODUCT REQUIREMENTS PlayStation®4 / Mobile device (iOS or Android) A free USB port or Bluetooth connectivity MOBILE APP REQUIREMENTS ...
Register your product online at razer-id.razer.com/warranty to get real-time information on your product’s warranty status. If you haven’t registered for a Razer ID yet, register now at razer-id.razer.com to get a wide range of Razer benefits. Your product’s serial number can be found here.
DEVICE LAYOUT Touchpad (Touchpad button) Status indicator Share button Directional pad Options button PS button Analog sticks (L3/R3 buttons) Configure button Action buttons Stereo headset jack F O R G A M E R S . B Y G A M E R S . ™...
Page 5
Multi-Function Triggers (M3/M4) Mode switch Trigger stop switches Triggers (LT/RT) Multi-Function Bumpers (M1/M2) Micro-USB port Bumpers (LB/RB) USB to Micro-USB cable F O R G A M E R S . B Y G A M E R S . ™...
Page 6
SETTING UP YOUR RAZER RAIJU TOURNAMENT EDITION CHARGING YOUR RAZER RAIJU TOURNAMENT EDITION For first time activation, please plug your controller to a powered USB port or use wired mode. It takes approximately 4 hours to fully charge your Razer Raiju Tournament Edition. Low power Charged CONNECTING TO YOUR PLAYSTATION®4 CONSOLE...
Page 7
3. Plug the USB connector of your Razer Raiju to your PlayStation®4 console and your Razer Raiju is ready to go. WIRELESS MODE Make sure your gaming console is turned on before proceeding. 1. Set the Mode switch to PS4 BT.
WIRED MODE 1. Set the Mode switch to USB. 2. Plug the micro USB connector to your Razer Raiju TE. F O R G A M E R S . B Y G A M E R S . ™...
Page 9
3. Connect your Razer Raiju TE to your PC. 4. Wait until the drivers are automatically installed or manually update the drivers through the Device Manager. WIRELESS MODE Make sure your PC is turned on and Bluetooth connectivity is activated before proceeding.
Page 10
3. Activate pairing mode by holding both the Options and PS buttons until the status indicator starts blinking rapidly. 4. Wait until the status indicator stops blinking and your Razer Raiju is ready to go. Pairing mode can be cancelled by holding the PS button until the status indicator stops blinking.
Enabled Disabled USING THE CONFIGURE BUTTON The Razer Raiju Tournament Edition has a configure button which you can use to connect / disconnect with the mobile app. Connected Disconnected When connected to the mobile app, you can change your controller’s button mappings, vibration levels, and analog sticks sensitivities.
Page 12
2. Launch the app and follow the onscreen instructions. Congratulations, you are now ready to use your Razer Raiju Tournament Edition. Have fun! F O R G A M E R S . B Y G A M E R S .
SAFETY AND MAINTENANCE SAFETY GUIDELINES In order to achieve maximum safety while using your Razer Raiju Tournament Edition, we suggest that you adopt the following guidelines: Should you have trouble operating the device properly and troubleshooting does not work, unplug the device and contact the Razer hotline or go to support.razer.com...
For the latest and current terms of the Limited Product Warranty, please visit razer.com/warranty. LIMITATION OF LIABILITY Razer shall in no event be liable for any lost profits, loss of information or data, special, incidental, indirect, punitive or consequential or incidental damages, arising in any way out of distribution of, F O R G A M E R S .
Product. In no event shall Razer’s liability exceed the retail purchase price of the Product. COSTS OF PROCUREMENT For the avoidance of doubt, in no event will Razer be liable for any costs of procurement unless it has been advised of the possibility of such damages, and in no case shall Razer be liable for any costs of procurement liability exceeding the retail purchase price of the Product.
Page 16
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Page 17
Canada Statement This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.