Table of Contents
Advertisement
2.3 Real-time averaging (AVG option)
Attributes
Attribute
AQMD3_ATTR_
ACQUISITION_MODE
AQMD3_ATTR_
ACQUISITION_NUMBER_
OF_AVERAGES
AQMD3_ATTR_NSA_
ENABLED
AQMD3_ATTR_NSA_
NOISE_BASE
AQMD3_ATTR_NSA_
THRESHOLD
28
Description
The acquisition mode (i.e. Averager).
Specifies the number of waveforms to average in the record. This attribute
affects card behavior only when the Acquisition Mode attribute is set to
Averager or PeakDetection.
Specifies whether the Noise Suppressed Accumulation is active. This
attribute affects card behavior only when the Acquisition Mode attribute is
set to Averager.
Specifies the noise base value for the Noise Suppressed Accumulation.
The noise base is subtracted from data values which are higher than the
configured threshold. The units are ADC counts.
Specifies the threshold of the Noise Suppressed Accumulation. Each data
value must exceed the threshold value to be entered into the sum. The
units are ADC counts.
U5310A User's Manual
Advertisement
Table of Contents
