Download Print this page

MODSTER M2 User Manual page 26

Advertisement

Available languages

Available languages

Betriebsanleitung
Charging Tips
During charging, the indicator light on the scooter shows the current charging level with a steady light and indicates the remaining charge
flashing.
Never charge the battery unattended!
Fully charge the battery before using the scooter for the first time. This will take 4-6 hours.
The battery needs to be charged in sufficient time. Failure may cause overcharging of the battery and serious damage to the battery.
Charge the battery with the enclosed manufacturer's original charger only. Ambient temperatures have to be between 0 and 45 ° Celsius.
Use only the supplied or integrated rechargeable battery and original spare parts.
Carry out regular checks of the connection plug and the charger. If damaged, they have to be replaced in order to prevent injury or pro-
perty damage.
Do not carry out any independent repairs on the battery or on the charger. If a repair or replacement of the battery or charger compo-
nents is necessary, please contact a certified dealer only.
Fully charge the battery each time before using the scooter for a long period of time.
Fully charge the battery every six months if the scooter has not been used. Storage without sporadic charging can cause the battery to
deteriorate over time.
Store the battery at temperatures between 10 ° and 30 ° Celsius.
Never drive the e-scooter without the battery connected, as this will destroy the entire electronics.
When charging the battery, make sure you have the correct plug connection, adequate ventilation and a dry environment.
Never bring the charger, the mains cable or the connecting cable into contact with water, as this could result in an electric shock. Do not
touch with wet hands.
Mains and connection cables must not be damaged or crushed by sharp edges or heat.
Do not operate the charger if the charger, power cord or connecting cable show visible damage.
Always charge on fireproof underground like stone or concrete.
Never store the MODSTER M1 in a discharged condition, as this can lead to complete destruction! Charge the battery every 6 months
when not in use.
Over discharge protection
The e-scooter has an internal over-discharge protection. If the MODSTER M1 is in the off state and the battery is low, the control system will
shut down to protect the battery bank. To bypass the over-discharge protection, the model must be recharged to re-activate the control sys-
tem. If the e-scooter does not „wake up" after 30 minutes of charging, contact your MODSTER dealer or MODSTER Customer Support.
5. Maintainance and Care
Storage
Avoid exposing the e-scooter to direct sunlight, rain or heavy moisture for a long period of time.
Perform a battery check and charge during longer periods of rest to ensure that the battery is fully charged and prevents overcharging
the battery.
The kickstand is designed as a support for the e-scooter. Do not stand on the e-scooter with the stand out. This action may cause the
stand to break.
Cleaning
Always turn off the e-scooter before cleaning it.
Please check if the charging socket and the power connection is shut and protected from water before cleaning your scooter.
Use cleansing wipes and clear or rinsed water to clean the outer parts of the e-scooter. Never immerse the e-scooter in water and never
let the scooter have contact with too much water.
Maintainance
Always turn off the e-scooter before cleaning it.
Always close the charging socket cover.
Use cleansing wipes and clear or rinsed water to clean the outer parts of the e-scooter. Never eve the e-scooter in water or put the e-scoo-
ter out of water.
26
MODSTER M2 Children Scooter
www.modster.at

Advertisement

loading
Need help?

Need help?

Do you have a question about the M2 and is the answer not in the manual?

Questions and answers