Gtx 345 System Interface - Garmin GTX 345 Operator's Manual

UNCONTROLLED COPY WHEN DOWNLOADED OR PRINTED
Magnetic Heading
(EFIS/HSI)
Source
GTN
ADS-B Out Position Source
(ADS-B In/FIS-B Display)
Remote Switch
(
TRAFFIC CANCEL
Traffic
System
Remote Switch
(
RMT.XPNDR.IDENT
Figure 7-2. GTX 345 System Interface (system options
5. The GTX 345 receives ADS-B traffic data (ADS-B, ADS-
R, TIS-B) through the UAT (978 MHz) and the 1090 MHz
receivers. The GTX 345 may also receive traffic data from
a TAS, if configured. Traffic data and alerting is provided
via a visual annunciator on a GTN series navigator and
audio callouts via an interfaced audio panel. Traffic data
may also be displayed on a PED (tablet) via the built-in
Bluetooth interface.
a. A pilot is able to view traffic information about
surrounding aircraft if those aircraft are equipped
with ADS-B out. This information includes altitude,
relative bearing, speed, and distance to aircraft. In
addition to receiving position reports from ADS-B out
participants, TIS-B (USA-only) can provide position
reports on non-ADS-B out-equipped aircraft if
suitable ground equipment and ground radar exist.
ADS-R re-transmits ADS-B position reports between
UAT and 1090 MHz frequency bands.
Report No. 28-AC-078
This electronic document is not linked to a subscription for revision control or distribution. Refer to the Optional Equipment
Supplement Publications Status link under the Technical Support Page of the Enstrom Helicopter website for the current revision
ENSTROM 480B RFM SUPPLEMENT
GTX 345
)
)
ANTENNA
indicated with dashed outline)
level of this Rotorcraft Flight Manual Supplement.
(AOG) Collective
Switch
Audio Panel
Altitude Encoder
(Typically included
with GTX 345)
OAT
7-3
CB
5 A
XPNDR
Dec 3/18