Measuring Water Hardness - DeLonghi MAGNIFICA S Get Started

Measuring Water Hardness

1. Remove the "total hardness test" indicator paper attached to the instructional
manual from its pack.
2. Immerse the paper completely in a glass of water for one second.
3. Remove the paper from the water and shake lightly. After about a minute,
1, 2, 3, or 4 red squares form, depending on the hardness of the water.
Each square corresponds to one level.
1
Press P button to
enter the menu.
4
Turn dial to select
level of water
hardness according
to indicator paper.
2
Turn dial until water
tank light is on.
5
Press the OK button to
confirm the selection.
TEST YOUR WATER
3
Press the OK button.
6
Press ESC Button
to exit the menu.
Choosing
the water
hardness
is very
important to
set the correct
frequency of
the descaling
cycles.
Keeping the
machine
clean will
improve its
performance
and prolong
the life of the
machine.
ECAM23210