Table of Contents
Advertisement
ENGLISH
I. SINGLE POST HEIGHT-ADJUSTABLE ARMRESTS (Option)
1. Installation
a) Slide the outer armpost into the receiver mounted to the wheelchair frame.
b) The armrest will automatically lock into place.
2. Height Adjustment
a) Rotate release lever to second stop.
b) Slide armrest pad up or down to desired height.
c) Return lever to locked position against armpost.
d) Push arm pad until upper armpost locks firmly into place.
3. Removing Armrest
a) Rotate release lever to first stop and remove the armrest.
4. Replacing Armrest
a) Slide armrest back into receiver.
b) Return release lever to locked position against armpost.
5. Adjusting Armrest Receiver Fit
To tighten or loosen the fit of the outer armpost in the receiver:
a) Loosen the four bolts on the sides of the receiver.
b) With the armrest in the receiver, squeeze the receiver to achieve the desired fit.
c) Tighten the four bolts.
6. Adjusting Inner Armpost Fit
a) Two set screws are installed in the outer armpost.
b) Turn the set screws in or out until the desired fit is achieved.
J. PADDED SWING-AWAY ARMRESTS (Option)
1. Installation
a. The armrest height is determined by the adjustment bolt (A) position.
b. Slide the armrest into the receiver tube (B) on rear of frame until the adjustment bolt
is securely seated (locked) in the receiver tube slot.
2. Swinging Away
a. Lift armrest out of the locked position and rotate to the side
3. Removing Armrest
a. Pull armrest straight out of the receiver.
K. PLATFORM FLIP-UP FOOTPLATE
The footplate (C) can be rotated up towards the user for transfers and adjustment.
14
15
17
VIII. USE AND MAINTENANCE
13
2
1. Outer armpost
2. Standard receiver
3. Release lever
4. Armrest pad
5. Transfer bar
6. Side panel
7. Outer armpost tension adjust-
8. Inner armpost
9. Receiver adjustment bolts
13
4
5
3
8
1
7
9
ment set screws
14
15
MK-100309 Rev. B
6
Advertisement
Table of Contents
