Amtrol PREMIER SERIES Installation & Operation Instructions

PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY
NOTE: Inspect for shipping damage and notify freight carrier or store where purchased immediately if damage is present. To avoid risk of personal
injury and property damage, if the product appears to be malfunctioning or shows signs of corrosion, call a qualified professional immediately. Current
copies of the Product manual can be viewed at www.amtrol.com. Use proper safety equipment when installing.
THIS IS THE SAFETY ALERT SYMBOL. IT IS USED TO ALERT YOU TO POTENTIAL PERSONAL INJURY AND OTHER
HAZARDS. OBEY ALL SAFETY MESSAGES THAT FOLLOW THIS SYMBOL TO REDUCE THE RISK OF PERSONAL
INJURY AS WELL AS PROPERTY DAMAGE.
READ
INSTALLATION & OPERATION INSTRUCTIONS.
FAILURE TO FOLLOW THE INSTRUCTIONS AND WARNINGS IN THE
MANUAL MAY RESULT IN SERIOUS OR FATAL INJURY AND/OR
PROPERTY DAMAGE, AND WILL VOID THE PRODUCT WARRANTY.
THIS PRODUCT MUST
PROFESSIONAL. FOLLOW ALL APPLICABLE LOCAL AND STATE
CODES AND REGULATIONS, IN THE ABSENCE OF SUCH CODES,
FOLLOW THE CURRENT EDITIONS OF THE NATIONAL PLUMBING
CODE AND NATIONAL ELECTRIC CODE, AS APPLICABLE.
INSTALLATION & OPERATION INSTRUCTIONS
INSTALLER: LEAVE THIS MANUAL WITH THE OWNER.
CAREFULLY THE
BE INSTALLED BY A
PREMIER SERIES
INDIRECT-FIRED WATER HEATERS
WHS-Series (Mechanical Control)
DC-Series (Mechanical Control)
PRODUCT
PERSONAL INJURY MAY OCCUR IF THE COVER BECOMES
DETACHED.
QUALIFIED
1, as listed in Clinical Toxicology of Commercial Products, 5th
edition. The pressure of the heat transfer medium must be limited to
30 PSIG by an approved safety or relief valve.
DO NOT LIFT OR CARRY WATER HEATER BY
THE TOP COVER. WATER HEATER DAMAGE OR
The heat transfer medium must be water or other
nontoxic fluid having a toxicity rating or class of
™