Electrical Connection; Replacing The Power Supply Lead - Technika TGC6GBK Instructions For Use And Installation

Installation

Electrical connection

This appliance is designed to operate on a power supply voltage
of 220-240V, single phase and is fitted with a 10A, 3 pin plug.
Before making the connection, make sure that:
1) The electrical system is able to withstand the load of the
appliance (see data label).
2) The power supply system has an earth connection in good
working order in accordance with the regulations in force.
3) The general purpose outlet is easily accessible with the
appliance installed.
In all cases, the power supply lead must be positioned so that it
does not reach a temperature 50°C above the room temperature.
An ideal route is shown in the 'Correct Installation' below. The
cable is guided by cable clips fixed to the side of the cabinet, in
order to avoid any contact with any appliance underneath the hob.
Cable
clip
Cable
clip

Replacing the power supply lead

If the supply cord is damaged, it must be replaced by the
manufacturer or its service agent or a similarly qualified person in
order to avoid hazard.
Hotplate
Gas
Supply
Pipe
Oven
Correct
Installation
Hotplate
Cable or
gas pipe
Oven
must not
contact
oven
Incorrect
Installation
20