Page 1
Battery Testing System |BTS 4000 |BTS 8000 | EVT 7000 Quick Start Guide For the full version of the Neware Battery Testing System user manual Please refer to www.neware.co/community/manual...
Page 2
To help protect your data security from sudden, transient power loss, uninterruptible power supply (UPS) is highly suggested for the hosting computer. For more information, visit: neware.co Before you start using the Neware Battery Testing System, It is assumed that you agree to the above statements. neweare.co 1 / 9...
1. Introduction Thank you for purchasing Neware battery testing system. Neware provides you accurate and flexible testing solutions to examine how batteries or capacitors perform. 1.1. Features Customizable current & voltage range 0.05% FS (Full Scale) accuracy Up to 1ms response time ...
Page 5
To host computer’s network. To connect auxiliary units or other compatible testing 11 Controlling Port facilities like programmable environmental chamber. *Due to the highly customizable character of Neware battery testing system, your tester may come out differently. neweare.co 4 / 9...
It may be necessary to re-set the circuit breaker. 2.2. Installing Software a) Preparation To run Neware software (BTSServer/BTSClient) on your computer, recommended system request will be as below: Item Technical Specifications CPU Frequency 2.4GHz or above...
Page 7
Installation Neware BTS software can be found on the included CD or download from our official web site www.newaretechnology.com/community/software- packages. Double click the file after you got the software package. This will prompt a screen enabling what to install on your computer. If this is the first running on your computer, please select all three, as below.
Below diagram illustrates ideal connection for voltage clamps 2.4. Using Neware Battery Testing System a) Configuration You will read a value for Server IP from the information label. Set this IP neweare.co...
Page 9
address to the computer you are going to host the testers. BTSClient Configuration 1) Default Server IP is 192.168.1.250. 2) You can also use the keypad to get the value of Server IP. 3) Server IP and Device IP cannot be the same of other IPs in the network. b) Mapping Channels Right click in the right area of the selected device then click Reset Map(M).
Page 10
tests. d) View Test Result Click on right click menu of the selected channel(s) will call BTSDA to load the View Data testing data. neweare.co 9 / 9...
Need help?
Do you have a question about the BTS 4000 and is the answer not in the manual?
Questions and answers