Yaesu FT-736R Operating Manual page 11

channel, which may be in another mode
or on another band.
CALL2
When receiving, this key switches
operation to a prestored call channel on
the same band. Notice that this is
different from CALL1, in that each band
may have a different call channel
recalled by CALL2.
BAND(OFFSETJ
As already mentioned, the default BAND
function changes
operating bands
sequentially with multiple pushes. When
this key is pressed just after the FIC1
button, the display shows the repeater
OFFSET, which can be changed with the
numbered keys, followed by the ENT[DJ
button.
(19)
AQS Buttons
1111E8CT
CAC
AOS
These
four buttons control the AQS
features, described in §4.20.
AQS
This button turns the AQS feature on
and off. When on, "AQS" is dispiayed in
an orange box at the right side of the
display.
D SQL
This button turns
system on and off.
"AQS" box and a
appear at the right
1f pressed white the
AQS is turned en.
the digital squelch
When on, both the
white "D SQL" box
side of the display.
AQS feature is off,
CAC
This Channel Access Cali button starts
search for a clear channel.
RESET
This key clears the AQS system, cancels
the D SQL function, if active, or the
F[C] or ENTED) states, if active.
(20)
MODE Selector Pushbuttons
~112:E1=1~1
• L tm • CSM
The default
functions of
these six
momentary buttons select the operating
mode and receiver IF bandwidth:
Button
LSB
USB
FM-N
FM
CW-N
CW
IF BW (6dB)
2.5 kHz
2.5 kHz
8 kHz
15 kHz
600 Hz (w/optional filter)
2.5 kHz
When pressed after the F[C) key, the mode
buttons select repeater shift [tRPTI,
or [-RFT], and tone squetch mode:
fENCI (encode), [T SQL) (decode en) and
[T OFF) (tone squetch off) if the FTS-8
Tone Squelch Unit is installed. Note that
this is not the same as Digital Tone
Squelch, which is supplied as part of AQS.
(21) Display
The diagram at the bottom of the next
page shows the various segments of the
display.
(22)
VOX PROC KEPER BURST LEDs
These indicators Blow green when their
a respective functions are stante:
— 10 —