3 .Please check if there's 24V voltage output from the J26(varnish lamp) & J27(uv ink lamp), if
no, replace the mainboard.
4 . Replace the uv lamp.
9.11 UV ink not dry.
1. All the products on the table not dry: Check the uv lamp, refer to the below uv lamp doesn't work solution.
2. Left and right side of the printing job are not dry:
A. Find the printer information and see if need to upgrade the machine system or not;
B. Adjust the uv lamp distance data in the P Atool driver.
3. Front and back side of printing jog are not dry:
A. Upgrade the HIPrintAPI06092.dll file;
10. Main board:
44