Fill Ink Into The Ink Tank - Nuocai NC-DX0406 User Manual

3. Fill ink into the ink tank

According the picture instruction below, add the corresponding ink to ink tank by the indication of the color mark.
The ink tank switch is open horizontally and closed vertically.
When adding ink,in order to prevent the ink from leaking out of the machine cover,protective
measures are required: The ink tank mouth can be wrapped with the tissues.After finishing adding
the ink, ink tank should not be tightened to help ink flows smoothly.
Firstly click "manual pump"on the control panel as bellow.
Press "Right" into the Maintainence page
After click "Enter", machine will start to suck the ink, check whether there is ink flowing into the waste ink tank.
If yes, the ink supply system is not blocked.As bellow:
Open Open
Find Manual Pump, then press Enter
Check whether the inks flows into the waste ink
tank from two black ink tubes, if yes, then
click"Exit"to cancel "manual pump"process.
Open