Color Manangemen - Nuocai NC-DX0406 User Manual

2. Job size: Size of the printing file;
3. Position: The position to the start printing point on the plate table;
4. Copies: Choose how many file wanna repeat and the distance between each file;
File setup: "F" to choose reverse printing or normal printing. Humanoid icons use to choose the direction of the
printing file.
Printing job panel(Hold:Save object and settings;Delete:Delete
object after printing;Repeat Object:Print photo repeatedly)
1. After ouput: Can use to save the file to save all the setup for next printing or delete the file after
printing;
2.Repeat job: Set up how many times of this printing wanna repeat. Like if you choose 2, after the first printing,
then the machine will start again to print one more time.

Color Manangemen

29