Nuocai NC-DX0406 User Manual page 26

5.2 Step Align: Adjust the Y axis direction print size.
Usually, we'll adjust before shipping the printer out and will print the Step align number on the paper which put
on the printer plate, just click the driver " Advanced Alignment", Then enter this page. Then on the basis of
enclosion " close" " low" " middle" "high" , separately input the number what we print on the paper of machine
print table.
5.3 W C Vert. Dis. : Do the white & color ink alignment on vertical direction. 1mm equals 3.
26