Print Setting; Print Alignment - Nuocai NC-DX0406 User Manual

4.4 Print setting：
1. Dir: There are three options of the printing direction, R to L & L to R are one way printing, with
better quality, yet slow printing speed; Bidi direction is with double printing speed, yet lower printing
quality. And when use the Bidi direction printing version, need to do the Hidi alignment for each
different print height.
2. Eclosion: the version how to print the ink(we suggest to use high or mid version, better high), can
test to see the printing quality in different version.
3. Speed: Print head printing speed, high and low, we suggest using high speed.
4. W C seq：Set print white ink first or color ink first. Normally, white_colour, however, when need to
print reverse, then choose colour_white, like when print on glass or acrylic which might need to print
on the back side and see from the front side.
5. W C set up: Choose to print Both(Both white & color ink), Only color, Only White.

5 Print alignment

5.1 For the alignment of the printer, need to do the vertical alignment first and see if the print head installed
correct or not, need to be straight.
25