Advertisement
Fig. D
Fig. E
7.
After wiring is complete, carefully press the electrical wires into the junction box, making sure not to pinch any wires
between the junction box and the heating panel.
8.
Install the end caps: Push the bottom edge of the aluminum heating panel towards the back panel, while installing
the end caps and lightly tighten the 2 screws to secure it. Do Not Overtighten, as the aluminum heating panel will
expand and contract during heating, requiring it to move freely. See Figure F.
Fig. F
CAUTION
The heater should not be covered or blocked in any manner.
SAVE THESE INSTRUCTIONS
File #E41422
Advertisement
