Sony WALKMAN MZ-NH1 Operating Instructions Manual page 52

2
Enter the menu and select "Useful" -
"Audio Out".
3
Press the 5-way control key towards
FR or FF until "Line Out" appears in
the display, and then press the control
key to enter the selection.
Notes
•
If the "Audio Out" parameter for the i/LINE
OUT jack is set to "Line Out", Virtual
Surround or 6-Band Equalizer will not
function.
•
The "Audio Out" parameter for the i/LINE
OUT jack cannot be set to "Line Out" when
the remote control is connected.
•
When you connect the headphones/earphones
directly to the recorder, make sure to set the
"Audio Out" parameter for the i/LINE OUT
jack to "Headphone" in step 3.
•
When the "Audio Out" parameter for the i/
LINE OUT jack is set to "Line Out", do not
connect the headphones/earphones. The sound
from the headphones/earphones will be very
loud and the sound distortion occurs.
•
If the recorder is connected to a component
such as an active speaker and the "Audio Out"
parameter for the i/LINE OUT jack is set to
"Headphone", make sure to set the "Beep"
setting to "Beep Off" (page 67).
52