Using A Md Walkman Connected To The Computer - Sony WALKMAN MZ-NH1 Operating Instructions Manual

Using a MD Walkman connected to the computer

Problem
Your computer does not
recognize the MD Walkman.
Even though the dedicated
USB cable is used to connect
the MD Walkman to the
computer, the display on the
MD Walkman does not indicate
it is connected.
Even though your computer
recognize the MD Walkman, it
does not operate normally.
122
Cause/Remedy
The MD Walkman is not firmly connected with the
supplied dedicated USB cable to the computer.
tReconnect the MD Walkman to the computer firmly.
tRemove and reconnect the MD Walkman. If the
computer still does not recognize the MD Walkman,
disconnect the cable, restart the computer, and then
make the connection again.
A disc is not inserted in the MD Walkman.
tCheck if a disc is inserted in the MD Walkman.
The Net MD driver is not be installed.
tInstall the SonicStage/MD Simple Burner software
using the supplied CD-ROM.
The software installation failed.
tDisconnect the connected device and install the
software again using the supplied CD-ROM.
The supplied dedicated USB cable is disconnected.
tConnect the supplied dedicated USB cable firmly.
The connections are made through a USB hub.
tOperations are not guaranteed for USB-hub
connections. Connect the MD Walkman directly to
the USB connector on the computer.
It takes time to recognize SonicStage. Please wait.
The other application software is running.
tReconnect the supplied dedicated USB cable after a
while. If the computer still does not recognize the
MD Walkman, disconnect the MD Walkman, restart
the computer, and connect the dedicated USB cable
again.
The supplied dedicated USB cable is disconnected.
tConnect the supplied dedicated USB cable firmly.
The connections are made through a USB hub.
tOperations are not guaranteed for USB-hub
connections. Connect the MD Walkman directly to
the USB connector on the computer.