Sony MZ-R410 Operating Instructions Manual page 53

Sony operating instructions portable minidisc recorder mz-r410, mz-r410dpc
Table of Contents

Advertisement

Error message Meaning/Remedy
NoCOPY
• You tried to make a copy from a disc that is protected by the Serial
NoDISC
• You tried to play or record with no disc in the recorder.
No SIG
• The recorder could not detect digital input signals.
PbONLY
• You tried to record or edit on a pre mastered MD (Pb stands for
SAVED
• You tried to record or edit on a MD with the tab in the record-protect
Saving
• The MD player is recording information (sounds) from the memory
SORRY
• You tried to erase the track mark at the beginning of the first track.
• You tried to erase a track mark to combine tracks the recorder cannot
• You tried to overwrite a track marks.
• You tried to press X or T MARK during synchro-recording.
• You tried to turn on the group function while programming.
TEMP
• Heat has built up in the recorder.
TrFULL
• Track number 254 has been reached.
TrPROT
• You tried to record or edit on a track that is protected from erasing.
• You tried to edit a track that has been checked out from a computer.
Copy Management System. You cannot make copies from a digitally
connected source which was itself recorded using digital connection.
, Use analog connection instead (page 20).
, Insert an MD.
, Make sure that the source is connected firmly (page 13).
"playback").
, Insert a recordable MD.
position.
, Slide the tab back (page 61).
to the disc.
, Wait until this process is completed. Do not expose the player to
any physical shock, nor disrupt power supply.
combine (a track recorded in stereo and in mono, for example).
, Turn the group function on before programming.
, Let the recorder cool down.
, Erase unnecessary tracks (page 41).
, Record or edit on other tracks.
, Check the track back in to the computer and then edit (page 61).
53

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mz-r410dpc

Table of Contents